Technology decision support
Find the Right Technology Guidance Choose the engineering area closest to your decision, then reveal the checks that should be confirmed before selecting a product route.
01 Compare technologies Compare the available motor and drive routes → 02 Match the application Connect technology to duty and integration needs → 03 Confirm with evidence Confirm the route with model-specific data → Technical reference
Motor technologies 4 results 01 Motor technologies AC Motors Induction, permanent-split-capacitor, three-phase, IEC and NEMA constructions for mains and inverter operation.
Reveal Technical Guidance → Close × Motor technologies
AC Motors Supply, phase and starting method Continuous duty and thermal rating IEC or NEMA frame and inverter compatibility Return to Subject ↑ 02 Motor technologies PMDC Motors Brushed permanent-magnet DC motors, armature control, starting torque, commutation and brush-life considerations.
Reveal Technical Guidance → Close × Motor technologies
PMDC Motors Nominal voltage and current demand Starting, continuous and peak torque Brush life, commutation and service access Return to Subject ↑ 03 Motor technologies BLDC & PMSM Electronically commutated permanent-magnet machines, winding selection, feedback and trapezoidal or sinusoidal control.
Reveal Technical Guidance → Close × Motor technologies
BLDC & PMSM Winding, speed and DC-bus selection Hall, encoder or sensorless feedback Trapezoidal or sinusoidal control Return to Subject ↑ 04 Motor technologies Smart EC Motors Integrated variable-speed motor and control solutions with analogue, digital or network interfaces.
Reveal Technical Guidance → Close × Motor technologies
Smart EC Motors Integrated control and supply interface Speed command and communications Protection, configuration and thermal limits Return to Subject ↑ Application support
Confirm the Technology Against the Complete Requirement General guidance narrows the route. Final selection should be checked against duty, integration, environment, evidence and production objectives.
Discuss Your Application → 